Product Description
The Marine Dual Remote Filtration System (BMK-18) offers easily
accessible remote mounting capability for a full flow spin-on oil
filter and a spin-on style by-pass oil filter. This unique
combination of both full flow and by-pass filtration on a single
mounting manifold is the only system of this kind designed
specifically for marine applications.
Improved Performance
The effects of marine engines running predominantly at or near full
throttle after extended periods of non-activity include high
operating temperatures and increased potential for wear on engine
components. Dual remote filtration is a highly efficient filtering
process capable of removing the vast majority of wear-causing
particles which are in the 5-20 micron range. Dual remote filtration
also has the ability to effectively remove particles down to one
micron in size. The AMSOIL Marine Dual Remote Filtration System
(BMK-18) offers a clear advantage by providing better oil
filtration, increased oil capacity and longer oil and filter life.
Reduces Heat
The BMK-18 requires a one- to two-quart oil volume increase,
offering increased oil cooling capabilities. The additional hoses,
fittings, filters and aluminum mount assemblies also allow the
engine oil to dissipate heat more efficiently as it passes through
the filtration system, extending the service life of both the engine
and the engine oil. Finally, the BMK-18 by-pass filter has the
ability to remove condensation and moisture from the lubrication
system.
Prevents
Moisture
Moisture typically condenses inside engines to combine with residual
combustion gases when engines are idle or run for short periods of
time, especially in humid environments. The resulting compounds
strip beneficial additives from engine oil and act as corrosive
substances that further degrade the engine oil and promote engine
wear.
Outstanding
Durability
The Marine Dual Remote Filtration System is designed to be used in
harsh marine environments. The hose fittings are coated with a 3 ml
layer of Alumiplate™and 1 ml of zinc and yellow chromate. This
Alumiplate coating is 10 times more corrosion resistant than
standard zinc and yellow chromate plated fittings. While standard
hydraulic fittings typically survive 96 hours in the grueling ASTM
B-117 Salt Spray Test, the Alumiplate coated AMSOIL Marine Bypass
System fittings lasted over 1,000 hours. In addition, the fasteners
and mounting bracket are stainless steel and the hoses are U.S.
Coast Guard approved.
Fewer Oil Changes
Depending on the boat owner's hours of use, the improved filtration
of the Marine Dual Remote System, along with the use of AMSOIL
synthetic lubricants, could completely eliminate oil and filter
changes during a typical boating season. With marine engines located
in a relatively confined and remote space within the watercraft,
ease of filter access and reduced oil spillage are also significant
benefits of the BMK-18.
The remote mount of the BMK-18 is also compatible with the new
AMS-Oiler™ Oil Precharger (AMK-01)
for added engine protection during the frequent dry starting that is
typical of marine engines that sit idle for even short periods of
time.
Applications
A large number of marine diesel engines have by-pass oil filtration
systems installed by the engine manufacturer. Until now, however,
this technology has not been available to smaller pleasure boats and
light commercial marine applications. The Marine Dual Remote
Filtration System was specifically designed for recreational and
commercial marine applications that use inboard or inboard/outboard
stern drive engines.
The
BMK-18 is packaged in kit form, which includes the Dual filter
mount, mounting hardware, hoses, hose fittings, component parts and
installation instructions. In addition, adapter kits of four
different sizes enable the BMK-18 to be installed on a wide variety
of recreational and light commercial marine gasoline-fueled engines,
including Chris Craft, Chrysler, Crusader, Evinrude, Johnson, Gray
Marine, Mercruiser, OMC, Pleasurecraft, Universal, Volvo Penta, and
Westerbeke. The BMK-18 kit offers a new heavy duty, machined
aluminum adapter and retaining nut that fits on the existing oil
filter mount. Each adapter kit is application specific and must be
ordered separately. Please consult BMK-18
Adapter Kit Reference Guide (G-2051) for specific applications.
Adapter kits are available for the most popular filter thread sizes.
When ordering the BMK-18 request one of the following adapter kits:
- BK-195 for ¾” x 16 thread
- BK-196 for 13/16” x 16 thread
- BK-197 for 18 mm x 1.5 mm thread
- BK-198 for 20 mm x 1.5 mm thread
|
Also, for ease of installation in some applications, optional 90
degree fittings (BK-199 and BK-200) can be mounted on the filter
adapter collar. These parts are also sold separately.
The AMSOIL Marine Dual Remote Filtration System represents the
cutting edge of filtration technology-another example of AMSOIL's
commitment to providing quality innovations that can benefit
consumers everywhere.
Specifics
Oil Capacity |
1 to 2 quart increase
|
Corrosion resistant |
Yes
|
External oil filter changes |
Yes
|
Remove moisture and condensation |
Yes
|
Ease/convenience of maintenance |
Yes
|
Contaminant removal |
Down to 1 micron
|
BMK-18
Frequently Asked Questions
BMK-18 Adapter
Kit Reference Guide (G-2051) (PDF - 23K)
BP-239 Marine
Dual Remote Filtration System Installation Instructions (PDF -
1.80MB)
|