1995 Harley Davidson FLHT Electra Glide

AMSOIL Dual Remote By-Pass Filter System
Submitted by AMSOIL Dealer Jimmy VanSise

Special Instructions:
Enclosed are pictures of the BMK-11 by-pass mounted on my 1995 Harley Davidson FLHT Electra Glide. I mounted the Billett aluminum bracket to the crash bar, as shown in picture. Everything included in the kit was used. A few 90 degree fittings were purchase separately and I reintroduced the oil back thru the oil filler, as shown in picture. I drilled through the rubber and removed the dip stick and trimmed the ball end to allow the oil back into the system. Below is a picture of a Cool Collar ordered thru J.C Whitney, Part #47UF0800Y  or Oil Filter Coolers which fits perfectly over the filter allowing it to also become an oil cooler. This has been installed on my motorcycle since 6/5/03 and I have approximately 4,000 miles on the AMSOIL 20W-50 motorcycle oil and AMSOIL SMF135C oil filter (on engine) with no problems.

Installation Photos - Click On Photos For Larger Image


Report problems to Webmaster